Introduction of the working principle of flange compressed air filter

　　With the wide application of pneumatic equipment, most industrial productions are inseparable from the compressed air power source, but there will always be many pollutants in the compressed air system, such as dust, dust particles, iron filings, and abrasive solid particles , Compressor lubricants, condensed water beads and acidic condensate, as well as oil and hydrocarbon mist, etc. If these pollutants are not filtered out, they will increase the maintenance cost of pneumatic equipment, resulting in malfunctions and damage to instruments and control devices The precision and smoothness of the products, as well as the pollution of the process, have developed a flanged compressed air filter that specifically solves this problem.
　　The following introduces the working principle of flange compressed air filter:
　　1. Carry compressed air containing harmful substances such as dust, oil, rust and moisture into the primary filtering device.
　　2. When the compressed air passes through the primary cylindrical mesh filter core, a coalescence effect occurs. Larger particles will be adsorbed on the filter material, and the moisture will condense into larger water droplets.
　　3. The water carrying impurity particles flows along the bottom to the drainage device and is discharged through an automatic or electric drainage valve.
　　4. When entering the separation chamber, the compressed air speed slows down, causing the particles to gather again, and the water mist condenses on a honeycomb water collector again.
　　5. More than 95% of the water droplets, oil and large particles in the compressed air have been removed by a filter element, and the compressed air after the first-stage filtration has entered the second-stage filter element.
　　6. When the compressed air passes through the second-stage fiber filter made of special cotton, thousands of small vortices will be generated. At the same time, the compressed air will be accelerated dozens of times. The center of the vortex is like a tornado, forming a vacuum state. The water droplets that have not been filtered in the first-stage filtration are again gasified, converted, and filtered, and at the same time, the particles as small as 5 microns are completely removed by the second-stage filter.
　　7. The two-stage filtration achieves clean, dry compressed air that is dust-free, rust-free, oil-free, and water-free, ensuring the normal operation of pneumatic equipment and extending the service life of pneumatic equipment.
　　The above is all the content that Xiaobian brings to everyone today, I hope it can help you.