Introduction of maintenance methods for particulate compressed air filters

　　More than 95% of the water droplets, oil and large particles in the particulate compressed air filter have been removed by the first filter element, and the compressed air after the first-stage filtration has entered the second-stage filter element.Passing through the second stage fiber filter made of special cotton, thousands of small vortices will be generated, and the compressed air will be accelerated dozens of times. The water droplets that have not been filtered out are again gasified, converted, and filtered out. At the same time, particles as small as 5 microns are completely removed by the second-stage filter.
　　The two-stage filtration achieves clean, dry compressed air that is dust-free, oil-free, rust-free, and water-free, ensuring the normal operation of pneumatic equipment and extending the life of pneumatic equipment.
　　The particulate compressed air filter and gas-water separator should be installed downstream of the after-cooler or air storage tank, installed at the lowest temperature, as high as possible to the point of use, and should be purged of debris in the pipeline before installation Main pipeline and gas point, avoid using bypass pipeline, the reason is to prevent leakage.
　　So how to repair and maintain the particulate compressed air filter? The following editors will introduce you:
　　1. The core part of the pipeline filter is the filter core. The filter core is composed of the filter frame and stainless steel wire mesh.
　　2. After working for a period of time, certain impurities have settled in the filter element. At this time, the pressure drop increases and the flow rate will decrease. It is necessary to remove the impurities in the filter element in time.
　　3. When cleaning impurities, pay special attention to that the stainless steel wire mesh on the filter core cannot be deformed or damaged. Otherwise, after reinstalling, the purity of the filtered media will not meet the design requirements. Compressors, dryers, instruments and other equipment will been destroyed.
　　4. If the stainless steel wire mesh is deformed or damaged, it needs to be replaced immediately.
　　The above is all the content that Xiaobian brings to everyone today, I hope it can help you.