Water separator can help solve the sewage problem in the catering industry

　　In the catering industry, a large amount of sewage needs to be treated every day, and do you know the harm these sewages have to us?In fact, there are many, for example, it will pollute water quality, corrode drainage pipes, block municipal pipelines, or even be made into gutter oil, and these sewages will also produce bad odors.It is difficult for everyone to imagine these hazards, what will happen to the city we live in.
　　With the development of science and technology, this kind of sewage will no longer be a problem for us. Only the use of water separators can easily solve the problem of sewage in the catering industry.
　　The water separator can be directly installed on the channel through which oily sewage flows, and the sewage outlet is directed to the water separator belt, and the device must be adjusted to the horizontal position.Before starting operation, the equipment should be filled with tap water, and the water level adjustment tank should be adjusted so that the top of the water level adjustment pipe and the upper edge of the oil spill tank are in a horizontal plane. The orientation of the water inlet pipe should be kept at a certain distance from the debris separation box to facilitate the removal of the debris separation box. When draining the oil, first open the drain valve, drain off some of the water at the bottom, and then collect the waste oil.
　　Notes on the water discharge of the water separator:
　　1. Release water timely
　　During routine protection and maintenance every day, it should be noted that too much water inside may exceed the warning line, and water must be released in time.
　　2. Don't forget to fill oil after draining water
　　After draining the water, be sure to remember to fill the fuel pump until the fuel pump is full. Otherwise, the vehicle will be affected.
　　3. Water release is frequent
　　First and foremost, after fuel consumption, the demand for water is released in time. Secondly, after replacing the fuel filter, the water should be released in time.
　　4. Pay attention to the insulation of the water separator in cold weather
　　Add a thick cotton coat to the water separator. In the northern region, some users carry out thermal insulation treatment in order to prevent the water separator from being frozen, that is, they are wrapped with a layer of thermal insulation material.
　　The above is all the content that Xiaobian brings to everyone today, I hope it can help you.