Introduction to maintenance and application of particulate compressed air filter

　　As a power source,compressed air has many flexible uses,such as driving motors, painting,controlling machines and driving devices.Like plastic processing,compressed air is indispensable in countless processing processes in the chemical industry.Good quality and high quality compressed air can certainly improve the processing technology, but compressed air containing impurities that do not meet the standard will reduce the production process and affect the quality of the product.The particulate compressed air filter can remove 99.99% of liquid water, oil, dust, fine particles and other impurities in the compressed air.
　　Since the particulate compressed air filter uses the special structure of activated carbon to eliminate the smell of compressed air, in order to maintain its service life, please be sure to install a two-stage three-stage drying filter in front of the filter, or use other drying filters.
　　Repair and maintenance of particulate compressed air filter:
　　1. The core part is the filter core. The filter core is composed of the filter frame and stainless steel wire mesh. The stainless steel wire mesh is a wearable part and needs special protection.
　　2. After working for a period of time, certain impurities are deposited in the filter element. At this time, the pressure drop increases, the flow rate will decrease, and the impurities in the filter element need to be removed in time.
　　3. When cleaning impurities, pay special attention to that the stainless steel wire mesh on the filter core cannot be deformed or damaged. Otherwise, after reinstalling, the purity of the filtered media will not meet the design requirements. Compressors, dryers, instruments and other equipment will been destroyed.
　　4. If the stainless steel wire mesh is deformed or damaged, it needs to be replaced immediately.
　　The following introduces the application of this product in three major industries:
　　1. Metallurgy: used for the filtration of the hydraulic system of rolling mills and continuous casting machines and the filtration of various lubrication equipment.
　　2. Textile: purification and uniform filtration of the polyester melt in the drawing process, protection and filtration of the air compressor, and degreasing and dewatering of the compressed gas.
　　3. Petrochemical: separation and recovery of products and intermediate products in the process of oil refining and chemical production, liquid purification, purification of magnetic tapes, optical discs and photographic film in manufacturing, oil field injection water and natural gas particle removal and filtration.
　　The above is all the content that Xiaobian brings to you today, I hope it can help you.