On the characteristics of heatless adsorption dryer

　　In general, heatless adsorption dryers are rarely used alone, and adsorption dryers are used in conjunction with filters in all air compressor systems.This can not only meet the needs of gas quality, but also the needs of the adsorption dryer itself to work normally.The heatless adsorption dryer is to change the operating conditions, so that the adsorption is carried out under pressure, the regeneration is carried out under normal pressure or under vacuum, the working cycle is only 5-10min, the device is small and simple to manufacture.It is based on the principle of pressure swing adsorption, the saturated compressed air from the upstream is contacted with the desiccant under a certain pressure, and most of the water is adsorbed in the desiccant, and the dry air enters the downstream work to reach depth The purpose of drying.
　　The following describes the characteristics of heatless adsorption dryer:
　　1. Compact: wall-mounted installation, small size and space saving.
　　2. Reliability: To ensure high reliability, there are only 4 moving parts, which are almost maintenance-free during operation.
　　3. Wide range of adaptation: 4 kinds of cycle time can be adjusted to meet the needs of different outlet dew points, to reduce gas consumption, regeneration gas flow is adjustable, to meet the needs of different outlet dew points, can be equipped with front and rear filters and other accessories without the need Change the design.
　　4. Fully automatic operation: the controller automatically and reliably switches timing, which is simple and reliable, and does not require regular maintenance.
　　5. Long life: The adsorbent compaction device ensures the long cycle and high efficiency of the adsorbent. The life of the desiccant exceeds 2-3 years. The high-quality adsorbent and pneumatic components are selected. The stainless steel material is used. It is durable and does not rust.
　　6. Stability: The controller design considers that there are small pressure and flow fluctuations downstream.
　　7. Mute: Use standard muffler, good effect, easy to replace, reduce noise.
　　8. Low consumption: low power consumption; when the outlet dew point can be adjusted high, the regeneration gas flow can be adjusted to reduce the air consumption.
　　9. Easy to maintain: There are adsorbent filling holes and discharge ports, easy to replace; removable stainless steel diffuser is convenient for washing.
　　The above is all the content that Xiaobian brings to everyone today, I hope it can help you.