The heatless adsorption dryer has requirements for the use environment

Heatless adsorption dryer is an advanced device that uses the principle of pressure swing adsorption to dry compressed air by filling it with super absorbent alumina or molecular sieves. Its features include:
1. Minimal regeneration air consumption: The tower body is designed to store 98% of the adsorption heat, maintain the high temperature of the regeneration gas, and improve the regeneration capacity; the drying and regeneration flow in reverse, so that the wet air does not flow through the dry adsorbent. Waste energy.
2. Stable outlet dew point: The large-capacity desiccant bed ensures sufficient contact time between the air and the desiccant and can fully absorb water; an additional 30% desiccant can compensate for the natural aging, ensuring that the desiccant life exceeds 3 ~5 years.
3. Easy operation: Microcomputer control system, with functions such as automatic timekeeping, automatic switching, working time setting, fault alarm, etc., can be equipped with RS485/RS232 and linkage interface, which can carry out remote communication, centralized control and air compressor linkage control.
4. Easy to maintain: independent adsorbent filling holes and discharge ports, easy to replace; detachable stainless steel diffuser for easy cleaning; can be equipped with a bypass pipeline, the air compressor can be dried without stopping and without affecting production Repair and maintenance.
5. Reliability: Choose high-quality shut-off valves and solenoid valves, with accurate action and reliable performance; pipe flanges are connected, no leakage, easy to disassemble.
6. Safety: Each tower is equipped with a safety valve; a heavy-load exhaust muffler to minimize noise; design and manufacture in line with pressure vessel specifications.
7. Regenerative air consumption can be adjusted, with energy saving and dew point adjustment functions.
8. Dew point monitoring and control system can be installed as required.
The heatless adsorption dryer should be installed in the room with an ambient temperature of 0-55℃. Ensure that the dryer is installed on a firm and reliable surface. There should be enough space around it. In order to ensure the performance and life of the dryer, the gas entering the dryer It should be pretreated by necessary equipment so that the gas temperature is not higher than 45℃, the oil content is not more than 1mg/m3, and there is no liquid water.