Product features of adsorption dryer

　　The adsorption dryer achieves the drying effect through pressure changes. Since the air's ability to hold water vapor is inversely proportional to the pressure, part of the dried air is decompressed and expanded to atmospheric pressure. This pressure change makes the expanded air drier, and then lets It flows through the desiccant layer that is not connected to the airflow and needs to be regenerated. The dry regeneration air sucks out the moisture in the desiccant and takes it out of the dryer to achieve the purpose of dehumidification. The two towers work cyclically, without a heat source, and continuously provide dry compressed air to the user's air system.
　　The following is an introduction to the product characteristics of the adsorption dryer:
　　1. The control system adopts a single-chip microcomputer program for automatic control, with stable and reliable performance.
　　2. With valve switch automatic display function, friendly man-machine interface, simple operation, convenient for daily maintenance.
　　3. The imported solenoid valve has reliable performance, modular design, and has action instructions, which is easy to maintain.
　　4. According to the actual load and humidity, the proportion of regeneration gas consumption can be adjusted to save regeneration gas energy consumption.
　　5. Compared with other electromagnetic valve control, the stainless steel pneumatic valve control has a longer life and ensures the long-term stable operation of the dryer.
　　6. The dust-proof filter of the air control system prevents dust from entering the pneumatic control components and reduces the valve failure rate.
　　7. The excellent barrel design saves 95% of the adsorption heat. The stored heat is used to increase the temperature of the regeneration air in the regeneration stage, improve the desorption capacity of the equipment, and make the regeneration complete; the drying and regeneration adopt reverse convection and moist air flow The effect is better when the adsorbent is over-dried; the gas consumption can be adjusted according to the operational load demand of the desiccant.
　　8. The suitable barrel size is to keep the flow rate and time of the gas passing through the desiccant layer in a good state, and give full play to the performance of the desiccant; reasonable system configuration, before the airflow enters the gas cylinder, remove the airflow in time by efficient degreasing Contains oil and heavy pollutants to avoid contamination of the dryer layer.
　　The above is all the content that the editor brought to you today, I hope it can be helpful to you.